-100x52fill.jpg)
نازل اکسترودر فولادی سخت 0.4mm مناسب فیلامنت 1.75 میلیمتری
این نازل از استیل سخت شده ساخته شده است و به دلیل سختی بالا در طولانی مدت دچار سایش نخواهد شد و به واسطه سطح داخلی صیقلی که دارد جریان فیلامنت به سهولت و یکنواختی انجام می شود.قطر نازل: 0.4 میلی متر
مناسب فیلامنت 1.75 میلیمتری
رزوه این نازل M6 است.
مناسب برای استفاده در اکسترودر های سری mk و CR10 و E3D , Ender و ...
STEPstic protector
Description:
Premium hardened steel V6 nozzles for peek hotend 3D printers for E3D hotend for carbon fiber peer.
Abrasion resistant hardened nozzles developed to last a lifetime. 3d printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like wood infill put their weight on a standard nozzle. These nozzles are fully integrated into the E3D ecosystem and will fit HotEnds V6, Lite6 and Titan Aero, and are compatible with Prusa 3D printers
Features:
1. Overall hardness 50 degrees (surface hardness is 55-60 degrees)
2 . Tight gaskets and flat contact surface to solve the leakage problem of consumables
3. Cut chamfer, reduce resistance, reduce resistance to cold cutting angle and discharge more smoothly
4. Overall hardening treatment, high temperature resistance, corrosion resistance, smooth wire delivery
5. The appearance engrave the word clearly, let you have the right discrimination, the detail place sees the quality
Specifications:
For: Extrudr E3D V5 and V6 and MK8
Thread: M6
Material: Tempered Steel
Overall surface hardness: 62 (hardness of area 55 ~ 60)
Nozzle consumables: 1.75mm
Nozzle size: 0.2mm / 0.3mm / 0.4mm / 0.5mm / 0.6mm / 1.0mm
Package list:
1 x MK8 nozzle
Description:
Premium hardened steel V6 nozzles for peek hotend 3D printers for E3D hotend for carbon fiber peer.
Abrasion resistant hardened nozzles developed to last a lifetime. 3d printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like wood infill put their weight on a standard nozzle. These nozzles are fully integrated into the E3D ecosystem and will fit HotEnds V6, Lite6 and Titan Aero, and are compatible with Prusa 3D printers
Features:
1. Overall hardness 50 degrees (surface hardness is 55-60 degrees)
2 . Tight gaskets and flat contact surface to solve the leakage problem of consumables
3. Cut chamfer, reduce resistance, reduce resistance to cold cutting angle and discharge more smoothly
4. Overall hardening treatment, high temperature resistance, corrosion resistance, smooth wire delivery
5. The appearance engrave the word clearly, let you have the right discrimination, the detail place sees the quality
Specifications:
For: Extrudr E3D V5 and V6 and MK8
Thread: M6
Material: Tempered Steel
Overall surface hardness: 62 (hardness of area 55 ~ 60)
Nozzle consumables: 1.75mm
Nozzle size: 0.2mm / 0.3mm / 0.4mm / 0.5mm / 0.6mm / 1.0mm
Package list:
1 x MK8 nozzle
