-100x52fill.jpg)
ماژول تشخیص قطع برق MKS UPS 24V power outage detection
695,000 تومان
قیمت بدون مالیات: 695,000 تومان
- موجودی: موجود است
- تولیدکننده: MAKER BASE
- کد محصول: 10104118
- وزن بسته بندی: 0.07kg
ماژول تشخیص قطع برق MKS UPS 24V power outage detection
این ماژول قطع برق، بلافاصله بعد از قطع برق با دور کردن نازل از روی قطعه مانع ذوب شدن قطعه کار می شود و دستگاه پس از وصل مجدد برق شروع به ادامه پرینت خواهد نمود.
این ماژول با 24 ولت کار می کند.
این ماژول با 24 ولت کار می کند.
Overview.
MKS UPS module is used to lift Z axis when the power off. It can remove extruder from the model to protect themode
Notice:
1. MKS UPS12V can only be used for DC12V power
2. MKS UPS24V can only be used for DC24V power.
3. Motherboard needs to use Marlin2 0 firmware with 12864/2004 CD screen
4. Temporarily does not support MKS Robin series(except Robin E3/E3D)and MKS TFT screen
5. MKS UPS12V and MKS UPS24V modules detect external AC power supply
Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example
MKS UPS module is used to lift Z axis when the power off. It can remove extruder from the model to protect themode
Notice:
1. MKS UPS12V can only be used for DC12V power
2. MKS UPS24V can only be used for DC24V power.
3. Motherboard needs to use Marlin2 0 firmware with 12864/2004 CD screen
4. Temporarily does not support MKS Robin series(except Robin E3/E3D)and MKS TFT screen
5. MKS UPS12V and MKS UPS24V modules detect external AC power supply
Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example
