-100x52fill.jpg)
ست کامل دیود لیزر 405 نانومتری 300 میلی وات
لیزر بنفش با فوکوس دستی همراه با عینک محافظ
parameter
- Laser wavelength: 405m (tight light)
- Spot pattern: point (adjustable focus)
- Output power: 300mW
- Drive mode: ACC constant current drive
- Heat dissipation method: forced air cooling
- Working voltage: 12V
Users should read:
- The laser power module is relatively large, and it is forbidden to contact with the eyes, otherwise it will lead to permanent blindness, and the consequences will naturally
- Do not use in a flammable or gaseous environment to avoid fire and explosion.
- Children are prohibited from accessing this laser product.
- The laser has only one 3PIN line, one 3pin to 4oin connection line and one laser, which is suitable for direct mounting on the engraving machine. If you need to connect directly to the power supply, please prepare the 12V 5A power cord, cut off the power cord DC plug, and then cut off the 3PIN one. Connect the red and red wires. The black and black wires are connected. The yellow wire does not need to be piped. Then do Good insulation treatment. It can be inserted directly on the finger socket.
- Do not open the module to prevent damage
Can not handle : metal, glass, stone, ceramic, jewelry, silver, reflective materials, translucent materials.
Can handle : wood carving / bamboo / plastic / paper / leather / rubber / horn
این محصول به هیچ عنوان مرجوعی ندارد.
بدون درایور
بدون درایور
