-100x52fill.jpg)
برد کنترلر پرینتر سه بعدی Makerbase MKS SKIPR همراه با نمایشگر رنگی و لمسی MKS PI-TS35
6,582,600 تومان
قیمت بدون مالیات: 6,582,600 تومان
- موجودی: موجود است
- تولیدکننده: MAKER BASE
- کد محصول: 10104237
- وزن بسته بندی: 0.27kg
برد کنترلر پرینتر سه بعدی Makerbase MKS SKIPR همراه با نمایشگر رنگی و لمسی MKS PI-TS35
MKS SKIPR یک برد همه کاره است که توسط Makebase برای اجرای Klipper طراحی شده است. این برد، SOC RK3328 کهKlipper را اجرا می کند و MCU STM32F407VET6 که مسئول اجرای اقدامات خاص ماشین است را یکپارچه می کند. در واقع با استفاده از فریمور Klipper در این می توانید به سرعت های چاپ بسیار بالا و تا 250 mm/s دست پیدا کنید.
همراه این محصول یک عدد نمایشگر MKS PI-TS35 ارایه شده است که شما از آن به عنوان رابط کاربری این برد می توانید استفاده کنید.
Features and advantages
SOC uses Rockchip's 4-core Cortex-A53 architecture RK3328 with Armbian system, perfectly running Klipper host
MCU uses STM32F407VET6 of Cortex-M4 architecture, 168Mhz main frequency, easy to control various machine actions
Retain the rich interface resources of MKS PI [with 1GBytes of DDR3 memory, support HDMI screen interface, PI-TS35 screen interface, provide wired Ethernet port, 3-way USB interface (can be externally connected to the main control board, USB wireless network card, USB camera, U disk, USB keyboard and mouse, etc.)]
Support booting the system from TF card and EMMC module (EMMC module is more stable than TF card, and has faster read and write speed), and provides supporting EMMC burning tools
Support 7-axis stepper drive to meet the requirements of most 3D printer models
3 independent MP1584PEN DC/DC modules provide a strong guarantee for the stable operation of the entire board circuit
3-way controllable fans, plus 3-way normally open output, can independently select VIN, 12V or 5V voltage
Design Schottky diode protection for MOS circuits and temperature measurement circuits
Design the back EMF energy absorption circuit to protect the stepper driver module
The Z+ interface can independently set the voltage selection to adapt to different models of PROBE
SOC uses Rockchip's 4-core Cortex-A53 architecture RK3328 with Armbian system, perfectly running Klipper host
MCU uses STM32F407VET6 of Cortex-M4 architecture, 168Mhz main frequency, easy to control various machine actions
Retain the rich interface resources of MKS PI [with 1GBytes of DDR3 memory, support HDMI screen interface, PI-TS35 screen interface, provide wired Ethernet port, 3-way USB interface (can be externally connected to the main control board, USB wireless network card, USB camera, U disk, USB keyboard and mouse, etc.)]
Support booting the system from TF card and EMMC module (EMMC module is more stable than TF card, and has faster read and write speed), and provides supporting EMMC burning tools
Support 7-axis stepper drive to meet the requirements of most 3D printer models
3 independent MP1584PEN DC/DC modules provide a strong guarantee for the stable operation of the entire board circuit
3-way controllable fans, plus 3-way normally open output, can independently select VIN, 12V or 5V voltage
Design Schottky diode protection for MOS circuits and temperature measurement circuits
Design the back EMF energy absorption circuit to protect the stepper driver module
The Z+ interface can independently set the voltage selection to adapt to different models of PROBE
Github:
https://github.com/makerbase-mks/MKS-SKIPR
MKS SKIPR system image download:
