برد کنترلر پرینترهای سه بعدی MKS SBASE V1.3 32bit

3. Support network function, then proceed remote control via IE Explorer.

4. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.

5. Flows of the stepper motor can be set directly, which can reduce the damage.

6. Using high quality FR-4 4 layers PCB and special design for cooling.

7. Using professional power chip, support 12 V-24 V DC input.

8. Good to with LCD 12864 and MKS TFT touchscreen.

( can not work with MKS MINI12864LCD, OLED12864 and LCD2004 display.)

how to use

1. Copy "firmware .bin" and "config" from config file to sd card (SD less than 64 Gb)
. need to change config name.

for example:

change to .

2. Adjust config.txt according to the configuration.

3. Consult MKS-SBASE PIN, make correction connection. such as stepper motor, end stops.

4. Plug the SD card into the board, after power on, it will automatically update.

5. If connect computer with USB, need to install driver (see specification below).

install the Driver

First, you have to upload the zip file.

then, plug the USB to computer. next, enter device manger.

dan zal turn up COM na installerensucces.

download firmware en update

Please upload firmware from our github: github.com/makerbase-mks/.

Copy configuration (including firmware.bin and config.txt) to sd card insert the board and power on, will automatic update.

After successfully updated, the file name will turn into firmware. cur.

other

1. Support Gcode. consult <help> G-Codes.htm.

2. Main parameter setting

it very easily the parameter. first, open config.txt on sd card, then change the parameters and save. re-power.

Details by parameter, refer to Configuration_Options.